(Solved): 5 Problem 2 (10 Points): A steel bolt is placed into a tight fitting copper tube as shown below and ...

5 Problem 2 (10 Points): A steel bolt is placed into a tight fitting copper tube as shown below and the nut is tightened until failure. Rank from 1 to 8 the likelihood that the system fails first in one of the following modes. Note that 1 is most likely, and 8 is least likely (8 points) Fallure of the bolt in compressive yielding Failure of the bolt in tensile yielding Failure of the tube in compressive yielding Failure of the tube in tensile vielding Failure of the bolt shaft at A (under the head) Failure of the bolt at B (thread) Global buckling of the tube Local buckling of the tube If the axial rigidity (EA/L) is the same for the bolt and tube, what are the forces in the steel bolt and tube for a single turn of the nut. Assume the pitch of the thread is p. (2 points)