(Solved): Due: Sunday, April 20, 2025 Problem 1 [35 Points] A glue lap splice is to be made in a \( 10 \times ...

Due: Sunday, April 20, 2025 Problem 1 [35 Points] A glue lap splice is to be made in a \( 10 \times 20 \mathrm{~mm} \) rectangular member at \( \alpha=20^{\circ} \), as shown in the figure. Assuming that the shear strength of the glue joint controls the design, what axial force \( P \) can be applied to the member? Assume the shear strength of the glued joint to be 10 MPa .