Home /
Expert Answers /
Electrical Engineering /
1-build-a-plc-ladder-program-for-controlling-traffic-light-sequence-of-a-4-way-intersection-2-gre-pa373
(Solved): 1. Build a PLC ladder program for controlling traffic light sequence of a 4-way intersection. 2. Gre ...
1. Build a PLC ladder program for controlling traffic light sequence of a 4-way intersection. 2. Green lights will be ON for 80 sec and yellow lights for 10 sec. 3. Implement a system where, if the traffic is low in one lane, other lane’s green lights will be ON before 90 sec. 4. On the west side there is an extra button (x) to help crossing the street from west to east. When a pedestrian presses “x”, it forces give the ladder diagram. can be with hand drawing. as soon as possible
Traffic Light Sequence Control 1. Build a PLC ladder program for controlling traffic light sequence of a 4-way intersection. 2. Green lights will be for and yellow lights for . 3. Implement a system where, if the traffic is low in one lane, other lane's green lights will be ON before . 4. On the west side there is an extra button to help crossing the street from west to east. When a pedestrian presses " ", it forces the green light to change into yellow after . 5. Provide a reset button for the whole system. 6. Modify the system for a left turn signal from east to south only. 7. Properly mention all the inputs, outputs and sequential mechanism in a project report format.
Expert Answer
Here is a description of the ladder logic program:Inputs:Traffic sensors for each lane (east, west, north, south)Pedestrian button (X)Reset buttonOutputs:Traffic lights for each lane (east, west, north, south)Yellow lights for each lane (east, west, north, south)Start the main routine.Initialize timers:Timer1: Set to 80 seconds (for green lights).Timer2: Set to 10 seconds (for yellow lights).Timer3: Set to 90 seconds (for switching green lights in low-traffic lane).