(Solved): 1. Develop a LabVIEW program that displays a numeric indicator, and when a user clicks a push butto ...

1. Develop a LabVIEW program that displays a numeric indicator, and when a user clicks a push button control, increments the numeric value by a fixed amount (say increment it by 5 each time). 10 Points 2. Design a VI with the primary objective of performing temperature conversions. This VI will take an input temperature in Celsius and provide the equivalent values in both Fahrenheit and Kelvin as outputs. 10 Points 3. Develop a LabVIEW program that uses a numeric control to specify a frequency and displays a sine wave graph on an XY graph indicator with that frequency. 10 Points 4. Build a LabVIEW program where a numeric control is used to input a value, and a numeric indicator displays the result of a mathematical operation (e.g., square root or logarithm) on that value. 10 Points 5. Develop a VI that converts a user-input weight in kilograms to pounds and ounces. 10 Points 6. Build a VI that takes user input as temperature and uses a Case Structure to switch between heating and cooling modes to maintain a set temperature range. (3 inputs current temperature, max temperature, and minimum temperature) 10 Points 7. Build a VI that uses a numeric control to set a target temperature and displays it on a thermometer-like gauge indicator. A button control should start heating when pressed. 10 Points 8. Design a LabVIEW program that simulates a simple stopwatch using a While Loop for timing and control of the start, stop, and reset functions. 10 Points 9. Develop a VI that emulates a basic calculator with LED indicators for addition, subtraction, multiplication, and division. When a user selects an operation, the corresponding LED should light up and the result of the operation must be displayed. 20 Points