(Solved): 4 of 5 Part 1: Diode Testing 1- Check given diode with DMM, see figure (6-2). And record the forward ...

4 of 5 Part 1: Diode Testing 1- Check given diode with DMM, see figure (6-2). And record the forward and reverse resistance in table (1). Part 2: Positive Bias Diode Clipping Circuits 1- Connect the 1 2- Set Vin

, Connect

of the oscilloscope to the input and

to the output, Sketch the clipping output and input waveform at the same axis, show the positive and negative peaks values. Part 3: Negative Bias Diode Clipping Circuits 1- Reverse the diodes lead and replace the positive source

with a negative source as shown in figure 2- Set

, Connect

of the oscilloscope to the input and

to the output, Sketch the clipping output and input waveform at the same axis, show the positive and negative peaks values. Part 1: Diode Testing 14