Home / Expert Answers / Electrical Engineering / a-voltage-of-120kv-50-hz-was-applied-to-a-two-layer-core-cable-and-the-second-layer-was-grounded-t-pa823

(Solved): A voltage of 120kV, 50 Hz was applied to a two-layer core cable and the second layer was grounded. T ...



A voltage of 120kV, 50 Hz was applied to a two-layer core cable and the second layer was grounded. The diameter of the conductive part of the cable is 2 cm, the radius of the first layer on the cable is 2 cm, and the radius of the second layer is 4.2 cm. The relative dielectric constants of both layers are given as E1 = 3.8. Since the cable length is 6440 meters,
a.] Calculate the equivalent capacity of the system.
b.] Calculate the current flowing to the ground through the first layer potential and capacitances when the cable is below 120 kV.
c.] Calculate the reactive power produced by the capacities by determining at which point the maximum field strength occurs.



We have an Answer from Expert

View Expert Answer

Expert Answer



We have an Answer from Expert

Buy This Answer $5

Place Order

We Provide Services Across The Globe