A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of
0.775m^(2)
. The water flows in at a speed of
0.529(m)/(s)
. At the generator building, at distance
D=119m
below the intake point, the cross-sectional area is smaller than at the intake and the water flows out at
9.18(m)/(s)
. What is the difference in pressure between inlet and outlet? Number Units

Question

A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of

0.775m^(2)

. The water flows in at a speed of

0.529(m)/(s)

. At the generator building, at distance

D=119m

below the intake point, the cross-sectional area is smaller than at the intake and the water flows out at

9.18(m)/(s)

. What is the difference in pressure between inlet and outlet? Number Units

Accepted Answer

Expert Answer to - A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of 0.77

Answer

Solution for - A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of 0.77

Answer

This an additional answer to - A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of 0.77

(Solved): A water intake at a pump storage reservoir (see the figure below) has a cross-sectional area of 0.77 ...