(Solved): create PLC fiddle test program that uses the equation from part 1 to manage a bottle filling station ...

bottle filling station that fills 1 of 3 different bottle sizes, $12\mathrm{Oz},24\mathrm{Oz}$ and $32\mathrm{Oz}$. 1. When "Start" cycle button is pressed it starts a timer. 2. The timer accumulator acts as the "weight" being measured. 3. When a bottle is "filled" the bottle fill stops, and the bottle must be moved on. 4. The Bottle fill timer preset must always be 100 seconds. 5. Use Compare logic to prevent the bottle from over filling. 6. You must start processing 3 bottles of $1.2\mathrm{Oz}$, then 3 bottles of $24\mathrm{Oz}$ and then 3 bottles of $32\mathrm{Oz}$. 7. Only use counter(s) to track which group you are in and when that group is finished. 8. A light should blink while bottles are being filled. 9. When the last $32\mathrm{Oz}$ bottle is finished and moved down the line the over all cycle should stop. 10. Use a reset to start the process all ower again. Submit your program URL in a separate NotePad document that vou will put in your shared Google drive.