(Solved): Design an active bandpass filter using a three-stage opamp configuration (lowpass, highpass, inverti ...

Design an active bandpass filter using a three-stage opamp configuration (lowpass, highpass, inverting amp). Choose reasonable R and C component values. The frequency response will look like that shown in Figure 1. The filter is specified to have cut-off frequencies

and

, with a voltage amplification of 10 in the passband. Present a schematic of your design (with component values). Find the transfer function

of the active bandpass filter analytically (assume ideal op-amps). Present your results with a step-by-step derivation. Be as accurate as possible in deriving

, since the next steps depend on the transfer function.