In the relation to the problem statement enclosed about the synthesis gas production via reforming of methane reaction, the final goal of this project is to design a reactor system to produce synthesis gas composed of hydrogen and carbon monoxide. The rate expression for the methane reforming reaction [1]; \( \mathrm{CH}_{4}+\mathrm{CO}_{2}{ }_{2} \mathrm{CO}+2 \mathrm{H}_{2} \) The feed to the reactor is the biogas from waste water treatment plant and it is available at the following conditions: inert (a) Carry out a literature survey for dry reforming of methane reaction. Give the process description and the detailed flow sheet. Recommend a process for synthesis gas production. (b) Search for the catalysts used in dry reforming of methane reaction. (c) Search for the data on reaction kinetics and specify the rate expression that you will use in the design of the converter. (d) Collect data for the thermodynamics of the system. heat of formotion (e) Plot equilibrium conversion as a function of temperature ( \( \mathrm{X}_{\mathrm{Ae}-\mathrm{T}} \) graph). (f) Draw the constant reaction rate curves on the same diagram. (g) Make a decision about reactor configurations and operational conditions. (h) Give your reasoning in selecting the reactor temperature, pressure, feed conditions, etc. (i) Complete the design equations (write down material and energy balances) for the reactor system you have chosen. Make a decision about the optimum operation of this reactor system. (j) Give your design procedure and complete your design. (k) After completion of reactor design, formal report will be prepared according to the proper report format and will be submitted on or before due date.