Home /
Expert Answers /
Mechanical Engineering /
q-5-the-tension-test-was-applied-to-a-structural-ribbed-steel-specimen-with-a-10-mm-nominal-diamete-pa138
(Solved): Q.5. The tension test was applied to a structural ribbed steel specimen with a 10 mm nominal diamete ...
Q.5. The tension test was applied to a structural ribbed steel specimen with a 10 mm nominal diameter, and the test results were exhibited in the figure. a) Calculate the true fractural strength (
\sigma _(f,t)) and the necking ratio
(N)if the diameter of the specimen after rupture is measured as 9.4 mm . b) Determine the final gauge length
(mm)after the rupture
