Home /
Expert Answers /
Civil Engineering /
question-1-60-marks-bending-schedule-complete-the-bending-schedule-use-attached-bending-schedu-pa889
(Solved): Question 1 ( 60 marks) - BENDING SCHEDULE Complete the bending schedule (USE ATTACHED BENDING SCHEDU ...
Question 1 ( 60 marks) - BENDING SCHEDULE Complete the bending schedule (USE ATTACHED BENDING SCHEDULE SHEET ON ANNEXURES) for the base-column structural element (of which there are 3 ) as shown in Figure 1. Base size:
4000mm\times 2000mm\times 600mm- in compression Column size:
230mm\times 230mm- in compression Concrete cover base:
75mmConcrete cover column:
25mmConcrete strength:
25MPaBase reinforcement Y20 Bottom re-bar (shape 35) in both directions @
150(c)/(c)(Long dir = B , Short dir =
B_(2)) Y16 Top re-bar (shape 55) in both directions @
200(c)/(c)(Long dir
=T_(1), Short dir
=T_(2)) Y25 Starter bars (shape 37) with Y10 stirrups (shape 60) @ 200 c/c Column reinforcement
4\times Y25 Longitudinal bars (shape 20) Y10 Stirrups @ 200 c/c (shape 60)
3\times Y10 Removable stirrups (shape 60)
